2022 Ford F-600 Regular Cab DRW 4x4, Godwin 184U Dump Truck (Stock #T228347)
- ENGINE: 6.7L 4V OHV POWER STROKE V8 TURBO DIESEL B20 -inc: Diesel Exhaust Fluid (DEF) tank intelligent oil-life monitor and manual push-button engine-exhaust braking 240 Amp Alternator Dual 78-AH 750 CCA Batteries
- Limited Slip w/4.88 Axle Ratio
- GVWR: 22
- 000 lbs Payload Package
- Wheels: 19.5 x 6.75 Argent Painted Steel
- AM/FM Stereo w/MP3 Player
- 6-Ton Hydraulic Jack
- Snow Plow Prep Package
- Engine Block Heater
- Transfer Case Skid Plates
- 332 Amp Alternators
- Utility Lighting System
- 4G LTE Wi-Fi Hotspot Removal
- Advanced Security Pack Inclination Sensor Removal
- Platform Running Boards
- Pre-Collision Assist
- Rear View Camera & Prep Kit
- Front License Plate Bracket
- Exterior Backup Alarm (Pre-Installed)
- Transmission Power Take-Off Provision
- 4-Wheel Disc Brakes
- Air Conditioning
- Electronic Stability Control
- ABS brakes
- Brake assist
- Delay-off headlights
- Dual front impact airbags
- Dual front side impact airbags
- Front anti-roll bar
- Front reading lights
- Fully automatic headlights
- Outside temperature display
- Overhead airbag
- Passenger cancellable airbag
- Passenger vanity mirror
- Power steering
- Rear anti-roll bar
- Steering wheel mounted audio controls
- Telescoping steering wheel
- Tilt steering wheel
- Traction control
- Trip computer
- Variably intermittent wipers
- Dual rear wheels
- Front Center Armrest w/Storage
- Remote engine start: smart device only (subscription required)
- View All
This body is available in lengths of 8' to 11' in 1' increments. Inside width from side to side is 84".
- SIDES: One piece sides with no welded seams. 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6" side board gussets with full length rub rails, and box-type sidebraces.
- RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides.
- FLOOR: 10 gauge two-piece high tensile steel floor with 2" floor to side radius. A607 grade-50 steel.
- FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing.
- TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6" higher than side.
- TAILGATE HARDWARE: Heavy duty: Standard upper hardware is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select.
- LIGHTS & REFLECTORS: FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof.
- UNDERSTRUCTURE: Completely jig built with 3" structural channel crossmembers on 12" centers and 5" structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals.
- POPULAR OPTIONS: 36" cab shield, 8 gauge sides, 3/16" one piece floor, fold down 13" sides, 18" sides, quick release upper hardware, other options available.
|Call For Pricing|
|Additional Upfit Cost|
Contact Crossroads Ford of Indian Trail, Inc. for more info.(704) 774-4952
Vehicle available NOW in Indian Trail, NC